PHiliphh MP50 LCD Assemble M8003-00112
PHiliphh MP50 Patient Monitor LCD Assemble M8003-00112 Rev 0710 2090-0988 M800360010
► Brief Description
PHiliphh MP50 LCD Screen Assemble M8003-00112 is the screen assembly on PHiliphh MP50 patient monitor. The unique wear-resistant touch surface of the MP50 patient monitor is connected with the touch screen and the display screen, and it is a collection of MP50 patient monitor screens. The PHiliphh MP50 patient monitor uses a 12-inch TFT LCD flat panel SVGA display with high-resolution waveform and data display. The screen can display up to six measurement data waveforms at one time, and can display 12 ECG trace lines when using the 12-lead ECG function. It adopts a unique design, and the tough and durable screen can effectively extend the service life. However, when transporting, installing, using or storing, it is still necessary to pay attention not to operate violently or improperly to avoid damage. The PHiliphh MP50 patient monitor LCD assemble M8003-00112 Rev 0710 2090-0988 M800360010 really meets the medical staff's requirements for screen viewing and the clinician's use requirements.
► More Details
External Touch Display not functioning :
| Possible Causes of Failure | Failure Isolation and Remedy |
| External Touch cable not connected | Check cable connection from external touch to MIB board |
| Main board defective | Replace Main board |
| External touch defective | Replace external touch |
| Touchscreen functionality has been permanently disabled | In service mode, select Main Setup -> User Interface and change the “Touch Enable” selection to “yes”. |
| MIB Board defective | Replace MIB board |
| External Touch driver configuration | Check RS232/MIB configuration: 1. Enter Main Setup menu 2. Select Monitor 3. Select Hardware 4. Reconfigure RS232/MIB drivers 5. if problem persists, proceed to the next step |
► Detailed Photos
► Composition
PHiliphh MP50 LCD Assemble M8003-00112 is mainly composed of cover glass, touch module, display module and other main parts. They make up the LCD screen assembly of the MP50 patient monitor, are very precise parts, and are one of the main components of the MP50 patient monitor. Among them, the cover glass is the outermost protective part of the screen of the PHiliphh MP50 patient monitor; the touch module is a key link to improve the interactive experience between the user and the MP50 patient monitor; and the screen display module of the MP50 patient monitor It is LCD, mainly composed of polarizer, color filter, liquid crystal, TFT, backlight, etc. It is the display screen used in the current MP50 patient monitor.
Thank you for your time. If you are interested in our company or our PHiliphh IntelliVue MP50 Patient Monitor Parts Color LCD Screen Assemble M8003-00112 Rev 0710 2090-0988 M800360010, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours. Wish you a happy life.
Product Tags:
|
|
IntelliVue MP50 Patient Monitor Parts Color LCD Screen Assemble M8003-00112 Rev 0710 2090-0988 M800360010 Images
|
